BUY
ONLINE
RECENT TESTS of BORPower®
An Independent & Scientific Evaluation of the Effectiveness of BORPower® on Fuel Saving Performed at the Motor Industry Research Association (MIRA) UK, October 2008.
NanoBoron have carried out at MIRA an IRTE/ BTAC (Institute of Road Transport Engineers /British Advisory Consortium) Type One Test on an 18 tonne flatbed
rigid vehicle, before and after the application of BORPower S-600 and recorded an outstanding 10.8 % saving in fuel consumption. A comprehensive report has been produced by Lorry Logic , an independent consultant company having more than 20 years experience performing this type of tests.
mira trial report
TESTS - CERTIFICATES
The quality and effectiveness of BORPower® has been validated several times by accredited industrial and scientific research and testing facilities in the UK, USA and Europe, whilst the production of BORPower® is consistently monitored according to the standards of ISO9001:2008.
BORPower® will cut the fuel consumption of your car depending on its age and condition, as well as reducing CO2-emissions and increase motor power. The full list of these international bodies is summarised below:
TÜV NORD (Technical Inspection Agency), Hanover, Germany, March 07
The value of BORPower® has been validated in exhaust and fuel consumption tests at the TÜV NORD (Technical Inspection Agency), Hanover, Germany. The tests followed the 98/69/EG and 1999/100/EG norms and were carried out using a brand-new Mercedes S320 CDI. After applying BORPower®, scientific analysis showed an improvement of the fuel consumption and CO2 emissions. The TÜV NORD certified to NNT Nanotechnology the effectiveness of BORPower®. The TÜV NORD continues to monitor the quality of BORPower® in future test campaigns.
Southwest Research Institute San Antonio Texas, USA, April 2006
The effectiveness of BORPower® has been validated in abrasion tests at the Southwest Research Institute. The tests followed the ASTM norms D5183 and D4172. After careful analysis of abrasion (scar) before and after applying BORPower®, the Southwest Research Institute could certify the effectiveness of BORPower®.
Federal Institute for Materials Research and Testing, X-BAM, Berlin, Germany, February, 2007
The nano-crystalline nature of the active ingredient nano boron in BORPower® was confirmed experimentally using x-ray diffractometry. The crystallite size of nano boron is 100nm.
Motor power test at MAHA, Zurich, Switzerland, April 2007
The test reports show that BORPower® improves the motor power between 3% and 10%. This is possible since BORPower® greatly reduces friction and wear in the engine.
Motor power tests with a Renault Megane revealed an increase (at the car wheel) of 3% at 6.000 revolutions per minute after applying BORPower®.
maha
bam
INDEPENDENT TESTS of BORPower®
Terry Bushell Travel, Volvo Single Decker Coach, January 2010.
Roger Denniss, Transport Engineer, Lorry Logic.
The results indicate that in the 5 months (March-July 09) prior to the BORPower being applied the coaches average fuel consumption was
8.61 mpg.
- In the four months (Aug-Nov 09) following the addition of BORPower the average fuel Improved by 5.5% to 9.09 mpg.
- During the last two months (Oct-Nov) it is probable that the coach would have been on Winter Derv that traditionally is less economical than Summer Derv.
- The oil analyses carried out by Alcontrol Laboratories concluded that the wear was satisfactory and that there was no contaminant.
Mini Cooper S (Super Charged Petrol) 1.6 L, October 2009.
"Following the successful track fuel evaluation work at the MIRA proving grounds and the fleet trials with Terry Bushel Travel that again proved positive I subjected my own Car fuel efficiency tests and I am happy to report the following results:
- Petrol consumption prior to this service and application of BORPower
33.90 mpg.
- During mid May and July and August fuel consumption recorded an improvement of 5.3% to 35.7mpg. My normal trips are very constant and almost identical on a day to day basis, could be described as rural .
- How ever in August I took a 360 mile round trip and recorded a fuel consumptionof 43.4 mpg against an anticipated 40 mpg an improvement of 8.5%. It was a clear run and no traffic congestion and I did not exceed 3000rpm ,well for most of the time .
- It is now October and I am back on short rural runs and recording according to the on board monitoring device 35.6 mpg _ a vehicle mileage approaching 90000 miles which is 5% better than I was achieving in May 2009 prior to the application of BORPower.
- As a professional Automotive Engineer I take the precaution of having the cars engine oil analysed by Alcontrol Laboratories of Conwy. Their last detailed report concludes that wear appears satisfactory and that there is no significant contamination."
terrybushellreport
minicooper-test
INDEPENDENT TRIALS of BORPower®
Kleine Logistik GmbH , Germany. June 2008.
Increased Fuel efficiency on vehicles with the use of BORPower® .
An independent test was carried out in Germany and concluded on the 15.06.2008 by the logistics company Kleine Logistik GmbH. The test conditions were real life with BORPower® applied to commercial vehicles according to the manufacturer’s instructions. During the test the fuel consumptions were monitored and the vehicles were checked regularly for a period of 6-9 months. The results showed reduced fuel consumption between 7.4% and 10.5% on different vehicles.
ANEGI, Germany. August 2008.
Generator efficiency inreased with the use of BORPower ®.
BORPower® S-600 has been tested, by ANEGI-Germany on a power plant station, (http://en.anegi.com/biogas-plants/anegi-services) and the results showed increase in the power efficiency by over 9%. The test has been run for a period over 900 hours. The original document in German along with a commented document in English.
Kleine Logistik-Test
anegi-test
